微波开关适配器模块及其驱动程序设计

Design of a Microwave Switch Adaptor and its Device Driver

摘要:

根据低轨卫星通信网程控交换系统研究和产品开发的需求，需要为一种遵循PXI总线标准的微波程控交换机设计基于微波开关的适配器模块，并为该适配器模块移植设计专用的设备驱动程序。微波开关适配器模块使用PCI9052总线桥电路实现了PXI总线接入功能，并采用国产FPGA电路编程实现了适配器的接口逻辑。在设计设备驱动程序时，针对微波开关访问所要求的同步和互斥需求，使用操作系统支持的事件对象、定时器对象和DPC例程等机制实现了对微波开关访问的安全操作管理。项目开发完成之后，采用工具软件对所设计微波开关适配器模块及其驱动程序的运行情况和操作功能进行了验证测试，与预期目标相符。

Abstract:

According to the research and product development needs of the PBX system for low-orbit satellite communication networks, it is necessary to design an adapter module based on microwave switch for this system that adheres to the PXI bus standard, along with the specialized device driver for this module. The adapter module uses the PCI9052 bus bridge circuit to achieve PXI bus access functionality and utilizes domestically produced FPGA circuit to implement the adapter"s interface logic. When designing the device driver, mechanisms such as Event object, Timer object, and DPC routine supported by the operating system were utilized to achieve safe operation management for microwave switch access, addressing the synchronization and mutual exclusion requirements. After the project development was completed, tool software was used to test the operation process and function of the microwave switch adaptor module and its device driver, which met the expected goals.