基于FPGA的IEEE488接口协议实现及驱动程序开发

Implementation of IEEE488 interface protocol and driver development based on FPGA

摘要:

IEEE488作为一种通用的并行总线，凭借其低延时、可靠传输等优势，广泛应用于仪器控制与测试系统中；目前，符合IEEE488接口协议的专用GPIB芯片如NAT9914、uPD7210、MC68488等都已停产，在售GPIB控制器产品类型少且价格十分昂贵，难以满足国内市场需求；因此提出了一种基于FPGA技术来实现IEEE488接口协议的方案，以典型的GPIB接口芯片NAT9914为蓝本，使用Verilog语言描述GPIB接口功能，调用VISA虚拟仪器函数库开发驱动程序与设备通信，组建完整的自动测试系统，并通过SCPI指令对仪器进行程控、数据采集等操作；经测试，产品性能稳定，能满足实际应用需求，且成本较低，有一定的市场价值。

Abstract:

As a general parallel bus, IEEE488 is widely used in instrument control and test systems with its advantages of low delay and reliable transmission.At present, special GPIB chips conforming to IEEE488 interface protocol, such as nat9914, upd7210 and mc68488, have been discontinued,GPIB controller on sale has few types and is very expensive, which is difficult to meet the needs of the domestic market.Therefore, a scheme of implementing IEEE488 interface protocol based on FPGA technology is proposed, based on the typical GPIB interface chip nat9914,using Verilog language to describe GPIB interface functions,Call the visa virtual instrument function library to develop the driver to communicate with the equipment, establish a complete automatic test system, and program control and data acquisition of the instrument through SCPI instructions. After testing, the product has stable performance, can meet the needs of practical application, and the cost is low, so it has a certain market value.