指控装备使用记录系统设计与实现

Design and Implementation of the Recording System of Command and Control Equipment

摘要:

指控装备构成复杂，包含设备种类多，目前，对这些设备的使用管理以人工记录为主，存在记录不详实、主观因素大、疏漏多等问题，难以为装备的维修、保障提供有效的数据支撑。针对这些问题，提出了基于电流监测数据的指控装备使用记录系统设计方法。该系统由电流传感器、单片机控制器以及串行通信接口组成，并基于CodeWarrior软件开发环境完成了软件设计，实现了对Freescale单片机ATD模块、SCI模块的控制，完成了数据采集与传输；基于MATLAB开发了GUI界面，完成了数据处理和子设备的状态显示功能。该系统能够通过简单的电流采集和模式匹配过程，完成4种子设备的开机、关机状态监测及使用时长记录，相对传统方法，电路设计简单，状态监测数据少，又不会破坏装备原工作环境。

Abstract:

The command and control equipment composition is complicated, including many types of equipment. At present, the use and management of these equipment is mainly based on manual records. There are problems such as inaccurate records, large subjective factors, and many omissions. It is difficult to provide effective data support for equipment maintenance and guarantee. In response to these problems, the accusation equipment usage recording system based on power monitoring data is proposed. The system hardware is mainly composed of current sensor, single-chip controller and serial communication interface, and the software design is completed based on the CodeWarrior software development environment, which realizes the control of the Freescale single-chip controller ATD module and SCI module, and completes the data collection and transmission. Developed GUI interface based on MATLAB, completed data processing and status display function of sub-device. The system can complete the use record management of the entire complex equipment through a simple current acquisition and pattern matching process. Compared with the traditional method, the circuit design is simple, the status monitoring data is small, and the original working environment of the equipment will not be destroyed.