基于嵌入式软PLC技术的智能控制器设计

Design of Intelligent Controller Based on Embedded Soft PLC Technology

摘要:

市场现存的智能控制器控制成功率低，控制过程消耗时间过长，整体性能较差。为了解决上述问题，基于嵌入式软PLC技术设计了一种新的智能控制器，在硬件元件功能方面进行优化设计，选用PLC6ED1055-1CB00-0BA0型号编辑器作为编辑模块主参考元件，设定智能控制器编辑模块，选用8460+8560系列增量型编码器作为智能控制器编码模块的核心设备，选用ZQWL-CANET-1C111型号调试器实现智能控制器调控。以嵌入式为主的软件操作主要采用直接存址方式进行系统数据储存，通过离散化处理实现控制程序，在理论操作的过程中需不断注意对主系统软件程序的保护，确保控制器工作过程的稳定性。为了验证控制器效果，设定对比实验，结果表明，基于嵌入式软PLC技术的智能控制器控制成功率比传统控制器高出15.28%，消耗时间更短，实用价值更高。

Abstract:

Existing intelligent controllers in the market have a low control success rate, the control process takes too long, and the overall performance is poor. In order to solve the above problems, a new intelligent controller was designed based on the embedded soft PLC technology, and the hardware component functions were optimized. The PLC6ED1055-1CB00-0BA0 model editor was selected as the main reference component of the editing module, and intelligent control was set. The editor module of the controller uses the 8460 + 8560 series incremental encoder as the core device of the intelligent controller encoding module. The ZQWL-CANET-1C111 debugger is used to control the intelligent controller. Embedded-based software operations mainly use direct storage to store system data. The control program is implemented through discrete processing. During the theoretical operation, continuous attention must be paid to the protection of the main system software program to ensure the controller's working process. stability. In order to verify the effect of the controller, a comparative experiment is set up. The results show that the intelligent controller based on the embedded soft PLC technology has a higher control success rate than traditional controllers by 15.28%, consumes less time, and has higher practical value.