油田注水硬件控制和远程监控系统的平台设计

Design Of Training Platform For Oilfield Water Injection Hardware Control And Remote Monitoring System

摘要:

针对油田注水时对注水设备控制和数据采集的实时性要求，基于实验室油田注水仿真设备设计了一个油田注水硬件控制和远程监控平台。采用多线程技术和SuperSocket技术设计了上位机远程管理系统软件，用户指令通过TCP/IP协议传送到下位机。井口端设备以STM32单片机作为控制器，用GPRS模块接收上位机指令以及传输注水设备的实时数据。经测试，上位机软件能够准确实时向下位机发送控制指令，系统的反应时间约1s。该研究对其他油田注水智能化管控研究有参考意义。

Abstract:

The multi-threading technology and SuperSocket technology are used to design the remote management system software of the upper computer. The user commands are transmitted to the lower computer through the TCP/IP protocol. The wellhead device uses the STM32 microcontroller as the controller, and uses the GPRS module to receive the host computer command and transmit the real-time data of the water injection device.After testing, the host computer software can send control commands to the lower computer in real time, and the response time of the system is about 1 s. This research has reference significance for the research of intelligent control of water injection in other oil fields.