三维虚拟动态测量系统构建方法研究
DOI:
CSTR:
作者:
作者单位:

(河南理工大学 机械与动力工程学院,河南 焦作 454000)

作者简介:

张登攀(1975-),男,河南平顶山人,副教授,博士,主要从事精密测量技术及仪器方向的研究。[FQ)]

通讯作者:

中图分类号:

基金项目:

河南省重点科技攻关项目(142102210051);河南省教育厅科技攻关项目(13A460338)。


Research on Method of Establishing 3D Virtual Dynamic Measurement System
Author:
Affiliation:

(School of Mechanical & Power Engineering, Henan Polytechnic University, Jiaozuo 454000, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对传统二维测量系统存在测量精度较低、稳定性差的不足,提出一种基于数据交互的三维虚拟动态测量方法;该方法采用三维构型与总线技术同步耦合的工作方式,对三维测量系统中模型驱动的关键问题进行了研究,探讨了三维测量系统中数据交互解决方法的可行性,并将该方法应用于煤矿排水系统,完成了三维虚拟动态测量系统的开发;试验结果表明由该方法实现的三维虚拟动态测量系统具有运行稳定、操作简单、直观性强、可靠性高的优点,应用前景广阔。

    Abstract:

    Aiming at the problems that the measurement accuracy is low and the stability is poor of the traditional two dimensional measurement system, we proposed a method of 3D virtual dynamic measurement based on data interaction. This method adopted the working mode of the synchronous coupling of the three dimensional configuration and bus technology. We studied the key problem of the model driven system in 3D measurement system, discussed the feasibility of data interaction in 3D measurement system, and applied this method to coal mine drainage system. Experimental results show that the 3D virtual dynamic measurement system realized by this method has the advantages of stable operation, simple operation, high reliability, and wide application prospect.

    参考文献
    相似文献
    引证文献
引用本文

张登攀,田振华,王东升.三维虚拟动态测量系统构建方法研究计算机测量与控制[J].,2016,24(5):59-62.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-11-16
  • 最后修改日期:2015-12-04
  • 录用日期:
  • 在线发布日期: 2016-07-27
  • 出版日期:
文章二维码