基于FT245RL和FPGA的6路数据采集系统设计
DOI:
CSTR:
作者:
作者单位:

(1.中北大学 电子测试技术国防科技重点实验室,太原 030051; ;2.中北大学 仪器科学与动态测试教育部重点 实验室,太原 030051; ;3.山西北方惠丰机电有限公司科研设计二所,山西 长治 046012)

作者简介:

祝敬德(1989),男,重庆人,硕士研究生,主要从事微系统集成与测试方向的研究。[FQ)]

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(50905169)。


Design of Six Channel Data Acquisition System Based on FT245RL and FPGA
Author:
Affiliation:

(1.North University of China Science and Technology on Electronic Test &Measurement Laboratory,Taiyuan 030051, China;;2.Key Laboratory of Instrumentation Science & Dynamic Measurement (North University of China), Ministry of Education,Taiyuan 030051, China;;3.Shanxi North Huifeng Mechanical & Electronic Co.,Ltd. No.2 Academic Institution, Changzhi 046012,China)[JZ)]

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对大规模数据采集过程中存在数据量大与传输速度慢的矛盾,文章设计了基于FT245RL和FPGA的6路数据采集系统;该设计采用Xilinx公司的FPGA作为整个系统的核心,控制A/D转换器实现6路模拟数据的同步采集,并将转换后的数字信号存储到Flash中,最终通过USB2.0转换芯片将数据传输到上位机;试验表明,该数据采集系统能够满足对大容量数据实时采集、存储和上传的要求,具有工作稳定,可靠性高,传输速度快的特点,能够广泛应用于大规模数据的采集。

    Abstract:

    Against the contradiction between volume data and low transmission rate in volume data acquisition, designed a six-channel data acquisition system based on FT245RL and FPGA. This system adopts the FPGA of Xilinx as the core which regulates the sequence of six-channel synchronousA/D conversion, storage of Flash and data transmission of USB2.0 chip. Experiment results show that this system meets the need of real-time acquisition, storage and transmission, have advantages of high stability, reliability and transmission rate, applying to volume data acquisition.

    参考文献
    相似文献
    引证文献
引用本文

祝敬德,李杰,冯凯强,刘俊,陈伟.基于FT245RL和FPGA的6路数据采集系统设计计算机测量与控制[J].,2015,23(1):187-190.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-03-27
  • 出版日期:
文章二维码