基于Step7和WinCC的焦炉集气管压力分级控制系统
DOI:
CSTR:
作者:
作者单位:

(1.广西科技大学 电气与信息工程学院,广西 柳州 545006; ;2.广西柳州欧亚自动化设备有限公司,广西 柳州 545006)

作者简介:

麦雪凤(1966-),女,广西柳州人,副教授,主要从事过程控制、智能控制教学及科研工作。[FQ)]

通讯作者:

中图分类号:

TP368

基金项目:


Coke Oven Gas Collector Pressure Hierarchical Control System Based on Step7 and WinCC
Author:
Affiliation:

(1.School of Electrical and Information Engineering, Guangxi University of Technology,Liuzhou 545006,China; ;2.Eurasian Automation Equipment Co., Ltd. Liuzhou 545006,China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对采用常规控制方法对焦炉集气管压力控制效果差、无法满足要求的现状,运用模糊控制和解耦控制原理以及Step7和WinCC软件,在已有焦炉集气管压力控制系统基础上提出一种基于模糊解耦控制的分级控制系统;介绍系统控制策略、程序开发、监控界面设计及系统运行调试等;运行表明:该系统控制效果良好,其控制精度、抗干扰能力等技术指标优于原指标。

    Abstract:

    Status conventional control methods for coke oven collector pressure control is poor, unable to meet the requirements, the use of fuzzy control and decoupling control theory and software WinCC Step7 and proposes a coke oven collector pressure in the existing control system based on hierarchical control system and fuzzy decoupling control. Describes the system control strategy, program development, monitoring, interface design and system operation and commissioning. Run showed that:the system control works well, the control precision, anti-interference ability and other technical indicators better than the original target. 

    参考文献
    相似文献
    引证文献
引用本文

麦雪凤,宁甲宇.基于Step7和WinCC的焦炉集气管压力分级控制系统计算机测量与控制[J].,2014,22(8):2431-2434,2446.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-12-01
  • 最后修改日期:2014-02-17
  • 录用日期:
  • 在线发布日期: 2014-12-16
  • 出版日期:
文章二维码